Table of Contents
Advertisement
WARNING
While the power steering is working at
reduced power, the driver support functions
with steering assistance are not available.
In such a situation, the driver display shows
the
Power steering failure
or
Steering Assist Temporarily Reduced
message, combined with a STEERING
WHEEL symbol.
Changing the level of steering wheel
resistance*
To change the level of steering wheel resistance,
see the description of the INDIVIDUAL option
under "Available drive modes" in the "Drive
modes" section.
On models not equipped with drive mode con-
trols and the INDIVIDUAL option, steering wheel
resistance can instead be set in the center dis-
play's Top view under:
Settings
My Car
Drive Modes
Steering force
Steering wheel resistance settings cannot be
accessed when turning at speeds above
10 km/h (6 mph).
Related information
•
Drive modes* (p. 419)
•
Pilot Assist (p. 305)
•
Lane Keeping Aid (p. 358)
•
Steering assistance at risk of collision
(p. 366)
•
Park Assist Pilot* (p. 389)
Power
DRIVER SUPPORT
Stability system Roll Stability
Control
1
The Roll Stability Control (RSC
minimize the risk of a rollover in the event of e.g.
a sudden evasive maneuver or if the vehicle
begins to skid.
The RSC system monitors the lateral angle at
which the vehicle is leaning and registers any
changes. Using this information, the system cal-
culates the likelihood of a rollover. If there is an
imminent risk of a rollover, Electronic Stability
Control is activated, engine torque is reduced and
brakes are applied to one or more of the wheels
until the vehicle has regained stability.
WARNING
The vehicle's stability systems, including RSC
do not replace the driver's responsibility for
operating the vehicle in a safe manner. Speed
and driving style should always be adapted to
the current road, traffic and weather condi-
tions. Posted speed limits should always be
respected.
) system helps
267
* Option/accessory.
Advertisement
Table of Contents
