Gas & Electrical Connection; Bracket Installation; Final Installation - Viking DGVU200 Installation Manual

Designer dgvu series built-in gas cooktops

Hide thumbs Also See for DGVU200:

Table of Contents

Gas & Electrical Connection

Replace the burner caps and grates.

Note: The narrow edge of grate goes toward center of unit.

Note: Refer to

"Electrical & Gas

Requirements"

section for

proper

installation

information.

Place brackets in the slots and lower until the

bracket catches. Use the bolt to tighten the cooktop

to the countertop. Note: There must be a 1" (2.5 cm)

clearance under counter on all four sides of cooktop.

Note: If cabinet construction does not provide

enough clearance for installing brackets on the front

and back of the burner box, install the brackets on

the sides of burner box.

Countertop

Cooktop

Bracket

Table of Contents

Dgvu260