3) Connect the remote controller wiring (accessory (13)).
Upper case
assy
Remote controller
wiring (13)
(accessory)
Lower case assy
4) Fit and install the upper case in the lower case while aligning the tabs (6 positions) with the lower
case.
• Be careful so that the wiring may not be caught.
• Remove the protection sheet attached to the upper case.
Upper case assy
Remote controller
wiring (13)
(accessory)
2. Remove the front panel, and then remove the back plate attached to the back side.
16
Fixed part
Upper case
assy
Hole
Fig. 23
Remote controller
wiring (13)
Fixed part
Clamp
(accessory of the remote controller)
Fig. 22
Lower case assy
Tabs (6 positions)
Clamp
(accessory of the
remote controller)
A
A
Section A-A
〈Control panel〉
English