• When removing the front panel, to avoid dropping the panel, tightly hold the front panel while removing
it.
Front panel
Screw
(M4)
Control box lid
Screw (M4)
(6 pcs.)
NOTE
• If the grille fixture comes off while
removing the front panel, attach the grille
fixture as shown below.
1. Install the grille fixture while aligning its
notch with the rib of the front panel.
2. Lower the grille fixture.
English
Screw (M4)
Back plate
Screw (M4)
Front panel
Rib
Front panel
2.
Wire harness for the
swing motor
Terminal block (X1M: 4P)
Screw (M4)
Fig. 24
Grille fixture
1.
Notch
Fig. 25
Rib
17