Install Batteries In The Remote Control; Battery Notes - Radio Shack 6001381 User Manual

Install Batteries in the Remote Control

1. On the remote control, set the ON/OFF switch to OFF.
2. Use a screwdriver to open the twin battery compartments. Then
insert four AAA batteries (not included), matching the polarities
(+ and –) marked inside. Replace the cover.
Note: If the remote control's LED flashes during use, the batteries
are low and should be replaced.

Battery Notes

• Dispose of old batteries promptly and properly. Do not burn or bury them.
Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different capacities.
• Remove batteries during longer storage periods. Batteries can leak
chemicals that can damage electronic parts.
6001381_PM_En.indd 5
5
8/13/2015 5:00:37 PM