Graphic Eq; Copying, Pasting, Comparing And Storing Geq Settings - Yamaha M7CL series Quick Start Manual

The virtual rack; Graphic EQ; Copying, pasting, comparing and
storing GEQ settings
At the top of the GEQ pop-up are buttons for COPY, PASTE, COMPARE and LIBRARY.
Ti i p p ; You can use the [RACK] tabs at the bottom of the
pop-up to move between different GEQ units.
Press the [LIBRARY] button to store or recall GEQ
curves.
Use any encoder below the screen to scroll through
the 199 library locations. Then press the [RECALL] or
[STORE] button.
M7CL Quick Start Guide Part 2
Pressing the [COPY] button stores
the displayed GEQ curve into a
temporary "copy buffer". If anoth-
er GEQ is selected to the screen,
then pressing the [PASTE] button
will change that GEQ to match the
copied source.
If you copy a GEQ curve to the copy
buffer", you can change the curve
and then press the [COMPARE] but-
ton to alternate between the two
curves.
Tiipp; You can copy and paste any GEQ curve to a 31 Band
GEQ but only curves with less than 15 bands moved will
paste to a Flex15GEQ.
N N oott e e; Flex 15 GEQ are treated as a pair of EQs when
saved to the library; they will copy and paste together!
9