Table of Contents
Advertisement
The virtual rack; Mounting units in the virtual rack.
The default Scene 000 has four effects and four GEQ selected. There are always eight virtual rack units, even if
some are blank or unused.
Only units 5-8 can be selected as effects. Any of the units can be GEQ or Flex15GEQ. To change the selected unit
from its current state to one of the other states, press the [RACK MOUNT] button. This brings up the RACK
MOUNTER pop-up window for the selected unit.
Newly mounted rack units are not patched. See page 7
to patch a new effect or GEQ.
Tiipp;;
If all eight units are mounted as Flex-15 GEQs then
the rack can contain 16 GEQs; great for monitor mixing
with wedges.
Tiipp;;
GEQ parameters are part of scene memory. If you
don't want the GEQs changing with scenes then press
[SAFE] below the Rack Mount button. This will "SAFE"
the patching and the fader settings against scene recall
changes.
M7CL Quick Start Guide Part 2
Press [RACK MOUNT] to open the Rack Mounter popup
and choose the kind of unit you want to mount.
And remember to press [OK] before closing
the popup!
4
Advertisement
Table of Contents
