Regulatory Compliance; Sar Statement - Cisco 7920 Regulatory Compliance And Safety Information Manual

Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions.

Regulatory Compliance

The Cisco 7920 Wireless IP Phone meets the regulatory compliance and safety standards listed in
Table 1
Table 1
Regulatory
Compliance
Safety
EMC/EMI
Radio
RF Exposure

SAR Statement

The Cisco 7920 Wireless IP Phone handset has been tested for body-worn Specific Absorption Rate
(SAR) compliance using the specific belt-clip/holster configuration provided with the handset. The FCC
has established the detailed body-worn SAR requirements and has established that these requirements
have been met with the specific belt-clip/holster provided with the handset. Other belt-clip/holsters or
similar accessories that have not been tested may not comply and therefore should be avoided.
78-15421-01
D R A F T - C I S C O C O N F I D E N T I A L
Regulatory Compliance and Safety Standards
Standard
UL 60950 3rd
•
CSA 22.2 No.950-95
•
EN 60950 Second Ed., including Amendments 1-4 with all
•
national deviations
EN55022-Class B
•
FCC Part 15.107 & 15.109 Class B
•
• ICES-003 Class B
AS/NZS 3548 Class B
•
EN55024
•
• VCCI Class B
• EN 301489-1/17
USA
• FCC Part 15.247
Canada
• RSS-210 Rev 5
Japan
TELEC T66 & 33
•
EU EN 300.328
•
• OET-65C (01-01)
ANSI C95.1 (91)
•
RSS-102
•
AS/NZS 2772
•
Regulatory Compliance and Safety Information for the Cisco 7920 Wireless IP Phone
Regulatory Compliance
3