Maintenance; Battery Replacement - SEFRAM MW3105 Manual

MAINTENANCE

WARNING
Remove test leads before changing batteries. Never operate instrument with battery compartment open.
CAUTION
Remove discharged batteries immediately to prevent damage from battery leakage.

BATTERY REPLACEMENT

The low battery symbol on the display indicates that battery power under load has dropped to about 7.4 V. The meter may still
be used for a short time afterwards; however, replace the battery as soon as possible.
The battery compartment cover is located at the rear of the case - near bottom. To replace battery, remove screw in cover then
remove cover. The meter uses a standard 9 V (NEDA 1604A / 6F22) battery. After replacing battery, be sure to replace cover
and tighten screw to secure the compartment.
HELPFUL HlNT, TEST LEADS
Only use the safety type test leads like those supplied with this meter for safe operation and to avoid false readings. Periodically
inspect these test leads to ensure that the conductors are not intermittent, corroded or broken. Keep the plug area of the meter
free of dirt.
Inspect the test leads for breaks in the insulation and replace as necessary.
25