Nokia NPE-4 Service Manual page 16

Customer Care Europe & Africa
SCCE Training Group
Display too dark/ too bright
When turning on the phone, the display LED´s V300 – V303
(See picture below) shine in different brightness.
This is caused by use of different LEDs. In this case change all LEDs and
assemble the right ones with spare part code 4864293.
Note! When changing the LEDs, first the RF frame has to be removed.
Be very careful when lifting the frame with hot air. A little drift beside
and some small components might be pushed away.
© NMP 2002
CONFIDENTIAL
NPE-4 6310/NPL-1 6310i
Date 15.08.2002
Checked by:
SCCE Training Group
16 (25)
Repairhints
Version 1.0 Approved
V300-V303
Approved by:
SCCE