Socket GPS Nav Kit Quick Start Manual page 8

STEP 5: Connect the Receiver and Mobile
Computer via Bluetooth
Connection instructions vary depending on which Bluetooth hardware and
software you are using with your mobile computer. Follow the appropriate
instructions for your mobile computer.
Socket SDIO or CF Connection Kit for Windows Mobile
1. The Bluetooth Status LED should be emitting a solid blue light to
show that the Bluetooth radio is on but not connected.
2. Insert the Socket Connection Card into your mobile computer.
3. Tap on the Bluetooth icon. Tap Advanced Features | Bluetooth Devices.
4. Tap on the Device Discovery icon at the bottom of the screen.
Alternatively, tap Tools | Device Discovery.
5. Follow the Device Discovery Wizard to search for the GPS Receiver.
6. After you have completed the Device Discovery Wizard, the GPS
Receiver should appear in the Bluetooth Devices folder.
7. Tap and hold your stylus on the icon for the GPS Receiver. In the
pop-up menu, tap Bond. Alternatively, select the GPS Receiver and
tap on the Bond icon, or tap Device | Bond.
8. Follow the Device Bonding Wizard to bond with the GPS Receiver.
When prompted, enter the passkey
9. After you have successfully bonded with the GPS Receiver, set the GPS
Receiver as your Favorite COM Port. In the Bluetooth Devices folder,
tap Tools | My Favorites | COM Port and select BTGPS.
10. Start MyNavigator. Tap Start | Programs | My Navigator
11. A warning screen will appear. Read the warning, then tap OK.
8
1234
.
Note: You only need
to discover, bond
with, and pair with
the GPS Receiver
the first time you use
it with MyNavigator.