All Other Bluetooth Hardware And Software - Socket GPS Nav Kit Quick Start Manual

All Other Bluetooth Hardware and Software

These are generic instructions for connecting the GPS Receiver to your
Bluetooth enabled mobile computer. For specific connection instructions,
refer to the user documentation for your Bluetooth hardware and software.
1. The Bluetooth Status LED should be emitting a solid blue light to show
that the Bluetooth radio is on but not connected.
2. Notebooks: Install and/or identify your Bluetooth hardware's outgoing
client serial port (attached to the serial port profile).
3. Perform a Bluetooth device discovery on your mobile computer to find
the GPS Receiver. Refer to the user documentation for your Bluetooth
enabled mobile compute for instructions.
4. If required, pair and bond the devices. Enter the passkey
Note: You only need to discover, bond with, and pair with the GPS
Receiver the first time you use it with MyNavigator.
5. Start the MyNavigator program on your mobile computer.
Pocket PC: Tap Start | Programs | My Navigator.
Notebooks: Click on the My Navigator icon on your desktop.
Alternatively, click Start | Programs | Socket | My Navigator.
6. A warning screen will appear. Read the warning, then tap OK.
7. The Bluetooth connection for MyNavigator must be set to the correct
COM port. Depending on the your Bluetooth hardware, you may or may
not need to modify the COM port setting.
Note: The baud rate must be set to 4800 to work with the GPS Receiver.
This is the default baud rate and needs no modification.
Bluetooth Hardware
HP iPAQ series 1900, 2200,
3870, 3970, 5150, 5450, and
5550 with integrated Bluetooth
HP iPAQ series 4100, 4300 with
integrated Bluetooth
All Others
10
COM Port Setting Requirements
No modifications are needed. The
MyNavigator default is COM8, the
same port used by these iPAQ's.
In MyNavigator, tap Tools | GPS | COM
Port and select COM 6.
Determine which COM port your
Bluetooth enabled mobile computer
is using for outbound serial
communication. Refer to the user
documentation for your Bluetooth
software. In MyNavigator, tap Tools |
GPS | COM Port and select the correct
COM port.
1234
.