Step 4: Turn On Receiver And Wait For Gps Fix - Socket GPS Nav Kit Quick Start Manual

4. In the Location drop-down menu at the bottom of the screen, select the
appropriate file storage location:
a. Pocket PC; Select Pocket PC Storage Card. In the Storage Card
Selection screen, use the drop-down menu to select the storage card
you want to use. Click OK.
b. Notebook: select C:
5. The amount of memory available at the specified location will appear in
the Available Space field at the bottom of the screen. Make sure there is
enough available space for the selected maps. Click Generate Map.
6. The Generating Map screen will appear. Map files will begin to load.
Depending on the size of the files, the process may take several minutes.
7. When map installation is complete, click OK.
8. Pocket PCs only: After software installation, disconnect the Pocket PC
from the host PC. Soft reset the Pocket PC by pressing the reset button.

STEP 4: Turn on Receiver and Wait for GPS Fix

1. To obtain a GPS fix, you must be outdoors or in
a vehicle, and the GPS Receiver must have a
direct line of sight to the sky.
2. Turn on the GPS Receiver and wait for the GPS
Status LED to blink green, indicating that it has
obtained a GPS fix.
Note: Certain metals such as lead (e.g., in lead-
based paint) can block GPS signals from the receiver.
7