Troubleshooting - Poulan Pro PR1842STD Owner's Manual

Poulan pro lawn mower user manual
Hide thumbs Also See for PR1842STD:
Table of Contents

Advertisement

TROUBLESHOOTING
POINTS
CAUSE
CORRECTION
PROBLEM
Will not start
Hard to start
Engine will not turn over
Engine clicks but will not
start
Loesofpower
Excessive
vibration
1.
Out of fuel,
2.
Engine not "CHOKED"
propedy.
3.
Engine flooded.
4.
Bad spark plug.
5.
Dirty air filter.
6.
Dirty fuel filter,
7.
Water in fuel.
8.
Loose or damaged wiring.
9.
Carburetor
out of adjustment.
10. Enginevalvesout of adjustment.
1.
Dirty air tilter.
2.
Bad spark plug.
3.
Weak or dead battery.
4.
Dirty fuel filter.
5.
Stale or dirty fuel.
6.
Loose or damaged widng.
7.
Carburetor
out of adjustment.
8.
Engine valves out of adjustment.
1.
Clutch/brake
pedal not depressed.
2.
Attachment
clutch is engaged.
3.
Weak or dead battery.
4.
Blown fuse.
5.
Corroded
battery terminals.
6.
Loose or damaged
wiring,
7.
Faulty ignition switch.
8.
Faulty solenoid or starter.
9.
Faulty operator
presence
switch(es).
1.
Weak or dead battery.
2.
Corroded
battery terminals.
3.
Loose or damaged widng,
4.
Faulty solenoid or starter.
1.
Cutting too much grass/too fast.
2.
Throttle in "CHOKE" position.
3.
Build-up of grass, leaves and trash under mower.
4.
Dirty air filter.
5.
Low oi{ level/dirty oil.
6.
Faulty spark plug.
7.
Dirty fuel filter.
8.
Stale or dirty fuel
9.
Water in fuel.
10.
Spark plug wire loose.
11.
Dirty engine air soresnifins.
12.
Dirty/cfugged muffler.
13.
Loose or damaged wiring.
14.
Carburetor out of adjustment.
15.
Engine valves out of adjustment.
1.
Worn, bent or loose blade.
2.
Bent blade mandrel.
3.
Loose/damaged
part(s).
1.
Fill fuel tank.
2.
See "TO START ENGINE" in Operation section.
3.
Wait several minutes before attempting to start.
4.
Replace spark plug.
5.
Clean/replace
air filter.
6.
Replace fuel filter,
7.
Drain fuel tank and carburetor, refill tank with fresh
gasoline and replace fuel filter.
8.
Check all wiring.
9.
See =To Adjust Carburetor" in Service Adjustments
section.
10.
Contact an authonzed
service center/department:
1.
Cleaniraplace
air filter.
2.
Replace spark plug,
3.
Recharge or replace battery.
4.
Replace fuel filter.
5.
Drain fuel tank and refill with fresh gasoline.
6,
Check all widng.
7.
See "To Adjust Carburetor" in Service Adjustments
section.
8,
Contact an authodzed
service center/department.
1.
Depress clutch/brake pedal,
2.
Disengage
attachment clutch.
3,
Recharge or replace battery.
4.
Replace fuse.
5.
Clean battery terminals.
6.
Check all wiring.
7.
Check/replace
ignition switch.
8.
Checkiraplace
solenoid or starter.
9.
Contact an authorized service center/department.
1.
Recharge or replace battery.
2.
Clean battery terminals.
3.
Check all widng.
4.
Chesk/raplace
solenoid or starter.
1.
Set in =Higher Cut" position/reduce
speed.
2.
Adjust throttle control.
3.
Clean underside of mower housing.
4.
Cleaniraplace air filter.
5.
Check oil leveVchange oil.
6.
Clean and ragap or change spark plug.
7.
Replace fuel filter.
8.
Drain fuel tank and refill with fresh gasoline.
9.
Drain fuel tank and carburetor, refill tank with flesh
gasoline and replace fuel filter.
10.
Connect and tighten spark plug wire.
1 1.
Clean engine air screen/fins.
12.
Cleaniraplace
muffler.
13.
Check all wiring.
14.
See "To Adjust Carburetor" th Service Adjustments
section.
15.
Contact an authorized
service center/dedartment.
1.
Replace blade. Tighten blade bolt.
2.
Replace blade mandrel.
3.
Tightan loose part(s).
Replace damaged
parts.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents