Using The Carrier Sheet - Visioneer PATRIOT P15 User Manual

®
V P P15
ISIONEER ATRIOT
●
Function—select the OneTouch function number that you want to use for automatic scanning. Select
Current to always use the current function number shown on the scanner display.
6. Click on OK to save the changes and close the window. Click on OK to close the Hardware Properties window.
7. Place an item face down, on the front or rear feed tray, aligned to the registration marks on the tray and insert
it into the scanner.
8. The scanner pulls in the item, scans and ejects it.

Using the Carrier Sheet

We recommend using the TWAIN interface when scanning with the carrier sheet. The Carrier sheet mode option
applies color correction specifically tuned for processing images of documents scanned using a carrier sheet.
Please refer to the TWAIN scanning guide on the installation disc.
It is recommended that carrier sheet scanning is used only with the front or rear feed.
Not all scanners are supplied with a carrier sheet. Carrier Sheets can be purchased from the Parts & Accessories
page for your scanner at www.visioneer.com.
WARNING: the plastic bag for the carrier sheet poses a suffocation hazard. Keep the bag away from
children.
1. Take the carrier sheet out of its plastic bag.
We recommend that you keep the bag and place the carrier sheet back in the bag when you are done
scanning. This will help to prevent scratches to the carrier sheet.
2. Remove the tissue paper.
38
L D S
OADING OCUMENTS TO CAN
S U ' G
CANNER SER S UIDE