◎ LED Alarm
Type
CDMA status LED
Scanner LED
◎ Battery attaching/detaching
Battery attaching
As picture shown, put the battery pack to back of PDA, and lock the battery pack with locking
device
Battery detaching
Press locking device to the right, then using upper notch, detach the battery from main body.
◎ Charging
Connect plug-in from charger to charge jack of main body, or charge jack of cradle, and then
place main body onto cradle.
Charging LED
Charging in Cradle LED
Direct charging to main battery
LED status
Blue
CDMA standby (within range of phone and internet) CDMA
Blinking
Blue
on
Blue
off
Green
When Barcode is read successfully
Type
Details
CDMA communication processing (in use of voice,
internet)
CDMA is off or out of range
LED Status
Red
Green
7
Details
In Charging
Fully Charging