N-Gen INT-910H Quick Manual page 10

If the battery is completely discharged, all data and file may get lost. To
Warning
prevent it, power of the main body to save mode. If low battery warning sign
is popped up, please recharge the battery before further use.
4. After connecting charger to N-GEN, LED will be light on located upper left of PDA. To
check if battery is fully charged, wait until LED becomes green. Charging will takes 3
hours from beginning to fully charge. N-GEN may be used while being charged however it
will cause more time to fully charged.
5. Setting Stylus pen: once N-GEN executing, the screen setting wizard will be popped up
(also will be popped up doing hard reset). The screen setting wizard will arrange the
touch screen. With stylus pen, continue to press (+) sign. Then (+) sign will move to other
location, continue to press (+) sign moving to that location. After all process are done,
N-GEN will show main screen where user can start to work.
6. Connecting to N-GEN to desktop PC: for Synchronization of files and data between
N-GEN and desktop PC, connect USB connector to USB port of desktop PC, then place
N-GEN to cradle. After that, execute ActiveSync to desktop PC.
7. Power off
If long period of time, device is not going to be used, please shut off power completely
pressing reset button longer than 4 second. This process is also identical as hard reset so
make sure to back up important data with backup memory.
10