N-Gen INT-910H Quick Manual page 16

To use IrDA communication:
1. Place IrDA port of N-GEN facing IrDA port of the device to communicate with.
2. Press Quick connection icon, then select IrDA communication
3. After executing IrDA communication, connection status message will be shown as
above picture. When device is found to communicate with, device name will be shown,
and also " send" , " connect / disconnect" icon will be shown same time.
4. To send file or data, press, " send " icon
5. Open file screen will be popped up, select file to send and press " OK" .
6. In the middle of IrDA communication window, file/data sending message will be shown.
When file/data is sent successfully, a message saying, " file sent 100%" will be
shown and file sending is completed.
7. When file or data is being downloaded to N-GEN from other devices, downloading
message will be shown. Downloaded file is stored in My Computer>My Received Files.
A message saying " File downloaded successfully" indicates that downloading file is
completed
8. When IrDA communication is completed, press " Disconnect the communication"
icon and close the IrDA communication program.
16