Location And Time Zone; Language - Philips NP2500/37 User Manual

Press BACK
•
screen.
• Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
• To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the NP2500.
• To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
• To delete the last character entry from the
display, press CLEAR.
• To delete the whole last line entry
from the display, press and hold
CLEAR.
The onscreen display guides you
through the process of connecting the
NP2500 to your home network and
the Internet. This section describes
the typical wired setup with static
IP address. You can also follow the
onscreen prompts for advanced
configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of the
NP2500 (see 'Rear view' on page 8) and
the Ethernet jack of the wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Turn on the NP2500.
4
Press SETTINGS, to go to the Settings
menu.
5
Select [Wired (Ethernet)] to start the
network setup process.
The NP2500 tries to acquire an
»
automatic IP address.
Press BACK
»
address manually.
6
Enter your static IP address and confirm.
EN
30
to go back to the previous
to enter your IP
The NP2500 shows the confirmation
»
for the connection to the network.
» The NP2500 shows the prompt for
the connection to the Internet.
7
Select [Yes] to connect to the Internet.
The NP2500 shows the confirmation
»
for the connection to the Internet.

Location and time zone

This is how you can change the location and
time zone settings of the NP2500:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Location and time zone].
3
Select a menu option and confirm.
» The NP2500 applies the new location
and time zone settings.
Press BACK
»
previous screen.
Press HOME to go to the Home
»
menu.

Language

This is how you can change the language of the
display:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Language].
3
Select a menu option and confirm.
The display language changes to the
»
new setting.
Press BACK
»
previous screen.
Press HOME to go to the Home
»
menu.
to go back to the
to go back to the