onscreen prompts for advanced
configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of
NP2900 and the Ethernet jack of the
wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Turn on NP2900.
4
Press SETTINGS, to go to the Settings
menu.
5
Select [Wired (Ethernet)] to start the
network setup process.
NP2900 tries to acquire an automatic
»
IP address.
BACK
Press
»
address manually.
6
Enter your static IP address and confirm.
NP2900 shows the confirmation for
»
the connection to the network.
»
NP2900 shows the prompt for the
connection to the Internet.
7
Select [Yes] to connect to the Internet.
NP2900 shows the confirmation for
»
the connection to the Internet.
Location and time zone
This is how you can change the location and
time zone settings of NP2900:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Location and time zone].
3
Select a menu option and confirm.
NP2900 applies the new location and
»
time zone settings.
Press
BACK
»
previous screen.
HOME to go to the Home
Press
»
menu.
EN
30
to enter your IP
to go back to the
Language
This is how you can change the language of the
display:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Language].
3
Select a menu option and confirm.
The display language changes to the
»
new setting.
BACK
Press
»
previous screen.
Press
HOME to go to the Home
»
menu.
Register NP2900
Registration of NP2900 requires a valid email
address and mailbox access.
This is how to navigate and select with the
remote control:
•
Press
or
to select a menu option.
•
Press
OK to confirm a selection.
BACK
•
Press
previous screen.
HOME to go to the Home menu.
•
Press
The alphanumeric buttons of the remote
control are multi-function buttons:
•
To select a number or an alphanumeric
character, press a button once or
repeatedly until you see the number or
alphabetic character in the display of
NP2900.
•
To cycle through the alphanumeric
characters that are available, press a
button repeatedly.
•
To delete the last character entry from
the display, press CLEAR.
•
To delete the whole last line entry
from the display, press and hold
CLEAR.
to go back to the
to go back to the