Table of Contents
Advertisement
Location and time zone
After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
According to the selected location and time
zone, NP3900 can
•
Set clock automatically over the
Internet (see 'Settings'->'Date and
time');
•
Pre-load preset Internet radio
stations automatically.
Language
After the first-time setup, you can change the
language selection in [Settings] > [Language].
Device information
From the home screen, go to [Settings] >
[Device ID and information]. You can learn
about information about NP3900, including
model number, name to be shown on a UPnP
server/client, software version and network
settings.
Check for software upgrades
On the NP3900, you can check for software
upgrades. After you click to agree to the terms
and conditions, the downloading and installation
of new upgrades start automatically.
1
Ensure that NP3900 is connected to the
Internet.
2
From Home screen, go to [Settings] >
[Check for software upgrades].
Demo mode
After the first-time setup, you can view the
demo again.
1
From Home screen, go to [Settings] >
[Demo mode].
»
Demo play starts.
2
To exit the demo play, press .
»
The unit is switched to Eco standby.
Restore factory settings
You can restore NP3900 to factory settings. All
your settings are removed, including the settings
of network, sound, display, clock, alarm and
language.
1
Go to [Settings] > [Restore factory
settings].
2
As prompted, select [Yes].
»
The unit is turned off.
»
The unit is turned on again
automatically when the factory settings
are restored.
»
Start the first-time setup.
EN
41
Advertisement
Table of Contents
