Philips NP2500/37 User Manual page 18

configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of the
NP2500 (see 'Rear view' on page 8) and
the Ethernet jack of the wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Follow the steps in chapter First-time
connection to home network (see 'First-
time connection to home network' on
page 14) until the NP2500 shows the
prompt for the network setup.
4
Select [Wired (Ethernet)] to start the
network setup process.
The NP2500 tries to acquire an
»
automatic IP address.
Press BACK
»
address manually.
5
Enter your static IP address and confirm.
The NP2500 shows the confirmation
»
for the connection to the network.
» The NP2500 shows the prompt for
the connection to the Internet.
6
Select [Yes] to connect to the Internet.
The NP2500 shows the confirmation
»
for the connection to the Internet.
EN
18
to enter your IP