Recommendations And Safety Instructions - SAGEMCOM D680C User Manual

MU 25XXXXXX-A_D680C_US.book Page 2 Dimanche, 2. septembre 2012 9:51 09
Recommendations and
safety instructions
For safety reasons, never put the handset in the base station without the
battery inserted or without the lid on the battery compartment as this
could cause an electric shock.
To avoid damaging your handset/base, only use certified rechargeable
batteries NiMH 1.2 V 750 mAh, never use non rechargeable batteries.
Insert the batteries in the handset/base battery compartment respecting
polarity, do not dispose of batteries in fire, they may explode, if the
handset will not be used for an extended period of time, unplug the
battery and remove it from the handset to prevent possible leakage,
keep batteries out of the reach of children
Only use the power unit supplied and connect it to the electricity mains
in accordance with the installation instructions in this user manual and
the details on the sticker regarding voltage, electrical current and
frequency. As a precaution if there is a risk of danger, the power plug can
be pulled out to disconnect the 120V power supply. Therefore the
sockets should be near the device and easily accessible.
Do not install your DECT telephone D680C in a damp environment, such
as a bathroom, washroom, kitchen etc, and not within 1.50 feet of a
source of water or outside. This device is designed for use in
temperatures of between 5 Celsius degree and 40 Celsius degree. Do
not expose the product to extreme temperatures such as areas near a
hot radiator, stove or in a hot car.
In zones where there is a risk of frequent thunder storms, we
recommend that you protect your telephone line using an electric power
surge protection device.
Avoid using the telephone during an electrical storm, there may be a
remote risk of electric shock from lightning.
Do not attempt to remove screws or open the appliance. It does not
contain any user-replaceable parts.
2