Saving Audio Setting To System Memory - Nakamichi SHOCKWAFE ELITE User Manual

SAVING AUDIO SETTING TO SYSTEM MEMORY

Two sets of audio settings can be saved on the Soundbar's memory, enabling quick
loading of settings optimized for user preference.
BLUETOOTH / USB MODE ONLY
HDMI
2 3
HDMI HDMI
ARC
4
HDMI OPTICAL COAXIAL
AUX USB
SYSTEM MEMORY
SYSTEM MEMORY
1 2
NIGHT
MOVIE ENTER
MUSIC
TAINMENT
CLEAR VOICE STEREO PURE DIRECT DSP OFF
V S D DSP
SETUP MENU
Saving settings to system memory:
+
1.
Hold down the SYSTEM MEMORY 1 or 2
ENTER
button until "SAVE1" or "SAVE2", corresponding
RETURN INFO
to the button pressed, is displayed on LED.
DIALOG CONTROL
+
SIZE
2.
When the SYSTEM MEMORY 1 or 2 settings are
VOL
BASS ROOM SIZE
saved, "M1SET" or "M2SET" is displayed.
LED
LED DIMMER
If system settings are already stored in the selected
+ + LIP +
CENTR TREB
SYNC
memory 1 or 2, the system overwrites the old settings.
LIP
CENTR TREB
SYNC
+
+
S L/R SB L/R SUR
ON
S L/R SB L/R SUR OFF
Function Button
Customized Memory 1
Long press to SAVE1
DSP & VOL
Once saved, show M1SET
Customized Memory 2
Long press to SAVE2
Once saved, show M2SET
LED Display on Sound bar:
5 LED DIGITS on Sound Bar
Loading settings
1.Press the SYSTEM MEMORY 1 or 2 button
once and the corresponding settings will be
loaded. If the SYSTEM MEMORY 1 button is
pressed, "M1" will be displayed.
The following audio settings can be saved to
system memory:
a) EQ mode
b) Volume
c) Bass
d) Treble
e) Center
f) Surround L&R
g) Surround Back L&R
29