TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold DOWN for 2 seconds. Then,
manually set the clock following the "Set Clock"
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF
You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
Press and hold MODE for 2 seconds. The Clock
Area will blink.
Select the time zone, hour, minute, year, month,
day, and language. Press UP or DOWN to change
the setting. Press MODE to confirm.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish.
The time zone options are (PA) Pacific,
(CE) Central, (MO) Mountain, and (EA) Eastern.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
BAR608HGA lab test R2
This product is equipped with a 2-minute crescendo
VIEW ALARM SETTINGS
Press ((.)). The Alarm Time and ((.)) status will show in
the Clock Area.
When the Alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press SNOOZE / LIGHT to
silence it for 8 minutes. Or, press
the next day.
Press ((.)) to switch to Alarm display.
Press and hold ((.)) again for 2 seconds. The Alarm
settings will blink.
Select the hour and minute. Press UP or DOWN to
change settings. Press ((.)) to confirm.
to activate or deactivate the Alarm.
shows in the Clock / Alarm Area when the Alarm
1/17/04, 4:39 PM
to turn it off until