Table of Contents
Advertisement
1
HDS Gen3 Polaris overview
The ability to network over NMEA 2000 and Ethernet allows access
to data as well as control of numerous optional devices that can
provide audio entertainment and weather.
All displays are charting ready, with built-in high speed GPS receiver
(10Hz) and support for Polaris embedded Topo base map or Polaris
Regional HD mapping card.
The displays may be mounted to the vehicle with the appropriate
optional Polaris vehicle dash mounting kit.
The displays are intended for 12 V DC operation, though will accept
the moderate fluctuations commonly seen in DC systems.
6 |
HDS Gen3 Polaris overview |
HDS Gen3 Polaris Installation Manual
Advertisement
Table of Contents
