Lowrance HDS Gen3 Polaris Installation Manual page 29

The HDS Gen3 Polaris to which connection is attempted will raise a
prompt.
Select Yes for one-time connection, or Always if device is to be
remembered for regular connection. This setting can be changed
later if required.
¼ Note:
The HDS Gen3 Polaris internal wireless module only supports
GoFree connection to its own display. Other displays connected via
ethernet are not visible.
¼ Note:
If it's required to show all displays available for control/viewing
via one wireless connection, use the external WIFI-1 module.
Connect to a wireless hotspot
Displays the Wireless device dialog that you can use to connect the
wireless functionality to a wireless hotspot.
Remote controllers
When a wifi device is connected, it should appear in the Remote
controllers list.
Software setup | HDS Gen3 Polaris Installation Manual
| 27