Table of Contents
Advertisement
When circuit breaker automatically stops motor due to overloading,
press "0" button and follow directions below.
Remove food residue in container. AND / OR
Cut ingredients smaller size and push them into
feeder gently. Resume operation.
The safety lock has been designed to prevent the blender or dry mill
from switching on when container is not properly in place.
Do not push the safety lock pin with any implement, stick etc.
When the slide ring on the back of the each container base is pushed
during assembling, motor does not operate.
請勿用細棒按壓
Attach the container to the container base properly.
After setting, make sure the backside of the
container base is as shown in the
Reduce ingredients to less than half. Resume operation.
If it still does not start, press "0"(Off) again, then resume.
illustration.
Hide quick links:
Advertisement
Table of Contents
