NOTE: When containers are not clamped or locked properly, motor does nor operate.
備注
To assemble, follow instructions in reverse order.
Release clamps. Lift up the juicer container.
Remove container cover. Remove spinner.
Remove spout cover.
Spout cover cannot be taken off when container cover is on.
CAUTION:
Be sure to attach container to corresponding container base.
Be sure to attach gasket when assembling blender container.
Do not attach or remove the container after container base is placed
on the motor housing, motor does not operate.
勿
: ﺗﻧﺒﻴﻪ