Panel Layout
Passive PoE Adapter
Remote Reset
Press and hold for 5 seconds to reset the CPE
to its factory defaults.
On: The wireless function is enabled.
On: A device is connected to this port, but there
is no activity.
Flashing: A device is connected to this port, and
is active.
On: The CPE is powered on.
RESET
Press and hold for 5 seconds to reset the CPE to
its factory defaults.
ETHERNET
The port is to connect to the POE port of the
provided PoE adapter for both data transmission
and power supply through Ethernet cabling.
Power LED
On: Power on.
Off: Power off.
3