Power Supply; Connecting The Poe Adapter; Mounting The Poe Adapter (Optional) - TP-Link CPE610 Installation Manual

Power Supply

Connecting the PoE Adapter

Connect the devices as shown in the figure below.
Ethernet cable
length up to 60m

Mounting the PoE Adapter (Optional)

Note: To ensure the passive PoE adapter is attached most securely, it is
recommended to install the adapter with the Ethernet port facing upward.
1. Drill two holes on the wall
and insert the plastic wall
anchors into the the holes.
Secure the mounting bracket
to the wall.
PoE LAN
2. Attach the passive PoE
adapter to the mounting
bracket by sliding the adapter
in the direction of the arrows
until it locks into place.
13