Table of Contents
Advertisement
4.
Change the default User Name and Password for security
purposes. You can then start to configure your CPE.
For subsequent logins, use the new username and password.
For more configurations, please visit
http://www.tp-link.com/support to download the User Guide of
PharOS products in the download center.
The typical topology is as follows: Multiple wireless bridges are
built among the access point and the clients. Follow the
instructions below to configure the Access Point and the Client.
For simplicity, we will take one wireless bridge as an example.
Client
Client
1. Log in to PharOS and go to the Quick Setup page.
2. Operation Mode: Select Access Point and click Next.
3. LAN Settings: Click Next.
4. Wireless AP Settings:
a. Create a new SSID (Network name) for your wireless
network.
b. Select WPA-PSK/WPA2-PSK for the Security method and
create a PSK Password to protect your AP.
Client
16
Access Point
Hide quick links:
Advertisement
Table of Contents
