Table of Contents
Advertisement
5
Attach the safety wire to the wall.
R Place the ring of the safety wire
(A) on the wall.
R Place the washer (B) on top of
the ring of the safety wire.
R Tighten the screw (C) for the
safety wire on top of the washer.
B
C
PLACE HOLDER
PLACE HOLDER
Note:
R Attach the safety wire while it is
bent.
R Attach the safety wire high on the
wall so that the unit does not
strike anyone in the event the unit
detaches from the wall.
R Do not hang from the unit or
stand.
For assistance, please visit http://shop.panasonic.com/support
A
Setup
19
Advertisement
Table of Contents
