Table of Contents
Advertisement
Setup
3
Attach the unit to the stand using the
stand attachment hole.
R Loosen the screw (C).
R Insert the tip of the stand (B) into
the stand attachment hole (A).
R Secure the unit by tightening the
screw (D).
PLACE HOLDER
PLACE HOLDER
18
For assistance, please visit http://shop.panasonic.com/support
4
Adjust the unit angle.
R Loosen the screw ( 1 ) and then
adjust the unit to the desired
angle.
R Tighten the screw ( 1 ) while
holding the screw ( 2 ) until the
unit is secure.
PLACE HOLDER
PLACE HOLDER
Advertisement
Table of Contents
