Troubleshooting; Warranty - Kärcher OC 3 Operating Instructions Manual

Transport
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
The supplied Li-ion battery has been checked in accord-
ance with the relevant regulations for international
transport and is permitted to be transported / dis-
patched.
 Observe regulations for dangerous goods during
transport.
When transporting by hand
 Lift appliance by the carrying handle and carry it.
When transporting in vehicles
 Secure the appliance against shifting and tipping
over.
CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance when storing it.
Storing the Appliance
 Park the machine on an even surface.
 Do not store the device at temperatures above
40°C and under 0°C.
Care and maintenance
DANGER
Risk of electric shock.
 Turn the device off and disconnect from the charg-
er before carrying out any tasks on the device.
Clean valve/fine filter
Clean valve and fine filter regularly.
ATTENTION
Valve and filter must not be damaged.
Illustrations -
 Remove the valve and fine filter using the suction
hose connection or a suitable pair of pliers.
 Clean the valve and fine filter under running water.
 Reinsert the valve and fine filter.

Troubleshooting

DANGER
Turn the device off and disconnect from the charger be-
fore carrying out any tasks on the device.
Repair work and work on the electrical components may
only be performed by an authorised customer service.
You can rectify minor faults yourself with the help of the
following overview.
If in doubt, please consult the authorized customer ser-
vice.
Appliance is not running
 Check the battery's charging state and charge it if
necessary.
Motor overloaded, the motor circuit breaker has tripped.
 Turn off the appliance.
 Switch on the device and put it into operation again.
At ambient temperatures below 0°C or above 40°C, the
motor circuit breaker will be tripped.
 Turn off the appliance.
 Allow device to cool down/heat up.
 Switch on the device and put it into operation again.
8
Storage
If the malfunction occurs repeatedly, have the device
checked by the customer service.
Pressure does not build up in the appliance
 Make sure there is enough water in the tank or wa-
ter container.
 Clean valve and fine filter.
Strong pressure fluctuations
 Clean the nozzle: Remove contamination and de-
bris from the nozzle drill, using a needle and rinse
through with water towards the front.
 Make sure there is enough water in the tank or wa-
ter container.
Appliance is leaking
 Dropwise leakage of the device is normal for tech-
nical reasons. If the leakage increases contact the
authorized customer service.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
Addresses can be found under:
www.kaercher.com/dealersearch
– 6
EN

Warranty