Advertisement
5. Lift the four side rails upwards
from the middle until each locks
into position.
6. Push down the centre support
until it locks into position. Check
and ensure all the locking devices
are fully engaged. If not, lift the
centre support and repeat step 5
& 6.
7. Lay mattress pad on the floor of
the travel cot, soft side up.
Check the assembly of the cot is
correct and safe.
8. Fix the velcro fastners under the
mattress onto the cot base, via the
two holes in the cot base. Your
travel cot is now ready to use.
WARNING: Always apply brakes before placing your child into
travel cot (if wheels supplied)
www.childcare-prod.com.au
4
To Fold the Travel Cot
1. Unfasten the velcro fasteners
underneath the cot, and remove
mattress pad.
2. Grasp centre handle: pull up to its
highest point. Use care as it may
release forcefully.
3. Lift the top rail, and squeeze the
outside buttons of the centre joint
until side rails release downwards.
Repeat for each side rail.
4. Gather unit together.
5. Lay mattress pad on floor - soft
side up and lay cot on mattress
pad.
www.childcare-prod.com.au
5
Advertisement
