Table of Contents
Advertisement
WARNING:
Only use brushcutter at-
tachments that provide a metal shield with
proboscis nose.
S Use only specified blade and make sure it is
properly installed and securely fastened.
S Cut from your left to your right. Cutting on
the right side of the shield will throw debris
away from the operator.
S Always use the handlebar and a properly
adjusted shoulder strap with blade (see AS-
SEMBLY instructions in brushcutter attach-
ment instruction manual).
CULTIVATOR SAFETY
WARNING:
Rotating tines can cause
serious injury. Keep away from rotating tines.
Stop the engine and disconnect the spark
plug before unclogging tines or making re-
pairs.
WARNING:
Inspect the area to be
cultivated before starting the unit. Remove all
debris and hard and sharp objects such as
rocks, vines, branch-- es, rope, string, etc.
S Avoid heavy contact with solid objects that
might stop the tines. If heavy contact oc-
curs, stop the engine and inspect the unit
for damage.
S Never operate the cultivator without the tine
cover in place and properly secured.
S Keep the tines and guard clear of debris.
S After striking a foreign object, stop the en-
gine, disconnect the spark plug and inspect
the cultivator for damage. Repair before re-
starting.
S Disconnect attachment from the drive en-
gine before cleaning the tines with a hose
and water to remove any build--up. Oil the
tines to prevent rust.
S Always wear gloves when servicing or
cleaning the tines. The tines become very
sharp from use.
S Do not run unit at high speed unless culti-
vating.
HEDGE TRIMMER SAFETY
DANGER:
RISK OF CUT; KEEP
HANDS AWAY FROM BLADE -- Blade
moves momentarily after the trigger is re-
leased. Do not attempt to clear away cut ma-
terial when the blade is in motion. Make sure
the switch is in the OFF position, the spark
plug wire is disconnected, and the blade has
stopped moving before removing jammed
material from the cutting blade. Do not grab or
hold the unit by the cutting blade.
Proboscis
nose
Blades move
momentarily
after the
trigger is
released.
WARNING:
starting the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc. that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
S Do not use a cutting blade that is bent,
warped, cracked, broken or damaged in
any other way. Have worn or damaged
parts replaced by your authorized service
dealer.
S Always keep unit in front of your body.
Keep all parts of your body away from the
cutting blade.
S Keep the cutting blade and air vents clear of
debris.
POLE PRUNER SAFETY
WARNING:
cause severe injury. Inspect the unit before
use. Do not operate unit with a bent, cracked
or dull blade. Keep away from the blade.
WARNING:
is sharp. Do not touch. To prevent serious in-
jury, always stop engine and ensure blades
have stopped moving, disconnect spark plug,
and wear gloves when changing or handling
the blade.
WARNING:
cause injury while it continues to move after
the engine is stopped. Maintain proper con-
trol of the unit until the blade has completely
stopped moving. Keep hands, face and feet
at a distance from all moving parts. Do not at-
tempt to touch or stop the blade when it is
moving.
WARNING:
cause severe head injury. Wear head protec-
tion when operating this unit with a pole prun-
er attachment.
5
Allow blades to stop
before removing
them from the cut.
Inspect the area before
Reciprocating blade can
The reciprocating blade
A coasting blade can
Falling objects can
Advertisement
Table of Contents
