Advertisement
OSD - Camera Setting
Camera setting
C A M E R A
S E T T I N G
In camera setting menu, you can setup camera module
ZOOM SPEED
HIGH
related settings. please note that depends on module's
DIGITAL ZOOM
ON
capability, some function may not available. please contact
BLC MODE
OFF
your local sales representative for detailed information.
SLOW SHUTTER
ON
LINE SYNC
N/A
WDR MODE
N/A
ZOOM SPEED:
ADVANCE SETTING 1
function.
ADVANCE SETTING 2
DIGITAL ZOOM:
BACK
function of the camera module.
EXIT
BLC MODE:
improves the image when an object has strong back light.
SLOW SHUTTER:
camera, which provides a higher light sensibility in low-
environment.
WDR:
Activates the Wide Dynamic Range function, which
improves the image contrast when an object has very strong
light on background. Only available with camera modules
with WDR.
Advanced setting 1
A DV A NCE SE TTING 1
IR CUT FILTER:
Filter (IRC), also known as "DAY/NIGHT" mode. with the
removal of IRC, the camera turns into Black/White mode and
IR CUTTER FILTER
AUTO
IR CUT ON TIME
N/A
has higher sensibility to low-light or IR-Light in the night.
IR CUT OFF TIME
N/A
Selectable between On, Off, Auto or Time. Only available
THRESHOLD
10dB
on camera module with IRC function.
MAX GAIN
28dB
EXPOSURE COMP
OFF
Max Gain:
MIRROR
OFF
EXPOSURE COMP:
FLIP
OFF
function
SHARPNESS
015
MIRROR, FLIP:
BACK
EXIT
SHARPNESS:
Advanced setting 2
A D V A NC E S E T T I N G 2
Under the advanced setting, you can make
improvements to image quality due to different
environmental conditions.
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
AE MODE:
BRIGHT
N/A
condition in the surveillance area, you can set the AE in
WB MODE
AUTO
different modes and adjust the parameters, such as
R GAIN
N/A
B GAIN
N/A
shutter speed, iris factor and brightness for the best
HI-RESOLUTION
OFF
image quality.
BACK
WB MODE:
EXIT
based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.
ALC, PLC:
additional setting to WB function. only avialble with
dedicated camera modules.
15
Some products may not be available in your country, please contact our distributor for more details
defines the speed when performing zoom
Activate or deactivate the digital zoom
Select the Back Light Compensation mode,
Activates the Slow Shutter function of the
Enables the removal of Infrared Cutter
improve the image quality in the Night modus
open/close the exposure compensation
mirror and flip image
Sharpness adjustion
Auto Exposure mode. Depends on the light
White balance mode, a image improvement
Average and Peak Level Control,
OSD - Preset, Scan
Function setting
F U N C T I O N S E T T I N G
In function setting menu, you can define and activate
PRESETS
different PTZ funcitons, such as preset points, auto
SCAN
scan, tours and Pattern. Presets and tour functions
PATTERNS
can also be set or activated directly from keyboard
TOUR
device without OSD. Please refer to the keyboard's
ZONES
manual for operation details.
TIME RUNNING
BACK
EXIT
PRESETS:
P R E S E T S
PRESET NUMBER:
P R E S E T N U M B E R 0 0 1
presets. The number can be selected from 0 to 128.
S E T P R E S E T
SET PRESET:
S H O W P R E S E T
OSD by entering this menu item and move the PTZ.
C L E A R P R E S E T
press IRIS-OPEN key on the keyboard to save. If the
AUTO-TRACKING
ON
preset is pointed within digital zoom, it will
E D I T P R E S E T L A B E L
automatically go back to max. optical zoom range in
BACK
order to provide the best image.
EXIT
SHOW PRESET:
CLEAR PRESET:
AUTO-TRACKING:
is called.
EDIT PRESET LABEL:
E D I T P R E S E T L A B E L
can define a name which will be shon on the
operation screen once the preset is called. please
：ROOM 1
LABEL
choose the preset number at first. The avaialbe
characters are: 0-9, A-Z, <,>,. and space.
BACK
EXIT
SCAN
SCAN
The SCAN function moves the PTZ between 2-
predefined points in constant speed.The
SCAN NUMBER 01
following parameters can be set:
SCAN SPEED
63
SET LEFT LIMIT
SCAN NUMBER:
SET RIGHT LIMIT
SCAN SPEED:
CLEAR SCAN
points.
RUN SCAN
SET LEFT LIMIT:
EDIT SCAN LABEL
SET RIGHT LIMIT:
BACK
CLEAR SCAN:
EXIT
RUN SCAN:
EDIT SCAN LABEL:
Some products may not be available in your country, please contact our distributor for more details
G35M Series supports up to 128
Defining the preset points directly in
Moves to current preset point
Clear the current preset
Start Auto Tracking, if the preset
For the current preset, you
G35M Series supports up to 4 scan.
cruising speed between the
defines the left point.
defines the right point
Delete the scan setting
starting the scan function
set the name for the scan
Advertisement
