Individual Settings; Important Information; Overview Of Programmes - Siemens iQ 300 varioPerfect User Manual

Individual settings

Spin speed in rpm/ without final spin
Before and while the selected programme is running, the spin speed or
laundry soaks in the last rinsing water) can be set. The effects depend on the programme
progress.
The maximum selectable spin speed depends on the model and on which programme is
currently selected.
Additional functions
–> and overview of programmes, see page 7
speedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load –> Overview of
programmes, page 7.
ecoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
(Easy-iron) Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
(Aqua Plus) Increased water level and additional rinse cycle, extended washing
time. For areas with very soft water or for further enhancing the spin
result.
Start/Pause
For starting or interrupting the programme.
Signal
1. Activate the
setting mode for
signal volume
Set to
Option:
Visually
impaired mode*
ON-OFF
ON-OFF
Button signals
2. Setting the
volume for...
1 step
–> model-dependent
(without final spin,
1000
900
800
600
+
1 step Press and 1 step
hold
*Short signal - function on.
direct
Long signal - function off.
Set to
Information signals
1000 1000
900 900
800 800
600 600
Setting the 1 step Setting the
volume** volume**
** you may need to select the function several times.

Important information

Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
light
intense
Soaking
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to
After approx. 10 minutes, press
soaking time has elapsed, press
a different programme.
Starching
1000
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the
900
fabric softener compartment in accordance with the manufacturer's instructions
800
if necessary).
600
Dyeing/bleaching
Release
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not use the washing machine for
bleaching clothes.
Set to
5
Wash new items of clothing separately.
Do not prewash. If required, choose the additional function
speedPerfect.
Pretreat any stains as necessary.
Do not load as much laundry.
Choose a programme with Prewash.
Load laundry of the same colour
Cottons cold and select
Start/Pause, to pause the programme. Once the required
Start/Pause, again to continue the programme, or select
Laundry must not be treated with fabric softener
Start/Pause.
(rinse first
6