Table of Contents
Advertisement
Before washing for the first time
Run a wash cycle without any laundry
Sorting and loading the laundry
Follow the manufacturer's care information.
Sort according to the information on the care labels.
Sort according to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Close the washing machine door. Take care not to trap items of laundry between the washing
Adding detergent and care products
Amount of laundry, level of soiling, water hardness (ask your water supply company) and
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
Dilute thick fabric softener and care products with water.
This prevents blockages.
Set** and adjust the programme
itional functions
Start/
Reload
Press
e temperature (
= cold)
e spin speed (* depending on the model) or
(Rinse Hold = no final spin,
emains in the water after the final rinse, - - - appears in the display panel).
me ends after ...
me sequence indicators:
se, spin, programme duration or end (-
-)
page 5
washing machine door, add laundry
page 4, 5
page 9
page 7.
page 9.
Insert items of laundry of varying sizes.
machine door and the rubber seal.
Measure accordingly:
manufacturer's instructions.
Models without insert for liquid detergent:
1
**If the
symbol is lit in the display
panel, Childlock active
Deactivate it,
page 5.
Additional functions and options buttons
Individual settings, page 5
2
/
(Start/Reload)
All buttons are sensitive and need only
to be touched lightly.
Press and hold the
:
(Finished in) option button for an auto-
matic run through all setting options.
Washing
Detergent drawer
with compartments I, II,
Washing machine door
Control panel
Washing machine
door handle
Service flap
Washing
3
Switching off
Turn the programme selector to Off.
Turning off the tap
Not required for HydroSafe models
Refer to Installation instructions.
Removing the washing
Open the washing machine door and remove the washing.
If
(Rinse Hold = no Final spin) active: Set programme selector to
(Drain) or
/
(deactivate the
. (Extra Rinse) button).
Select the spin speed if necessary.
Select
/
(Start/Reload).
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent drawer open
so that any residual water can dry away.
End of programme when ...
...the
/
(Start/Reload) button is off and –
the display panel.
If the display panel light is off, press any button
saving mode, page 5.
Cancelling the programme
3
Programmes at high temperatures:
– Cool laundry: Select
/
– Select
/
(Start/Reload).
Programmes at low temperatures:
– Press the
/
(Rinse/Spin) button (deactivate the
. (Extra Rinse) button) or
– Select
/
(Start/Reload).
Change the programme, if...
... you have selected the wrong programme by mistake:
– Select the new programme.
– Press
/
(Start/Reload) button. The new programme
starts from the beginning.
Top up laundry, if ...
...
/
(Start/Reload) is pressed and then both of the
+
symbols are lit in the display. If
machine door cannot be opened.
Select the
/
(Start/Reload) button.
(Rinse/Spin)
– appears in
Energy
(Rinse/Spin).
(Drain).
page 5
is lit, the washing
4
Advertisement
Table of Contents
