Setting And Adjusting The Programme; Washing - Siemens iQ 300 varioPerfect User Manual

Before washing for the first time
Wash once without any laundry –> page 9.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting and adjusting a programme
Additional functions and spin
speeds –> Individual settings,
tional Start/ page 5.
ctions Pause
s are sensitive and
to be touched
s and hold the spin
ton, the appliance
ally cycles through
g options.
Measure accordingly:
1
2
Select Start/Pause

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn the programme
selector to Empty or select the spin speed.
Select Start/Pause.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models –> refer to installation
instructions
Switching off
Turn the programme selector to Off.
Programme has ended when...
... Start/Pause flashes and the
on.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select Rinse/
– Select Start/Pause.
Programmes at lower temperatures:
– Rinse/ Spin (deactivate
select Empty.
– Select Start/Pause.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start/Pause. The new programme starts from
the beginning.
indicator light comes
Spin.
(Aqua Plus) button) or
4