Teufel Radio 3sixty Technical Description And User Manual page 18

Time
Time/date
Set the date and time manually here.
Time update
Here, you can set how the time
should be automatically set:
• via DAB radio;
• via FM radio (using RDS);
• via the network – enter the time
zone and summer/winter time
here in the next step;
• No update – enter the date and
time manually here.
Format
Set the display format for the time
here: 12 hours (with AM/PM) or 24
hours.
Only for an update via the network:
Set time zone
Select your time zone from the list.
Summer/winter time
You can switch the summer time on
and off here.
Language
Select the language for the display.
Factory reset
This clears all modified settings:
The Radio 3sixty will restore the
default settings.
Software update via WiFi
Auto-check setting
You can switch automatic updating of
the firmware version on and off here.
18 • Radio 3sixty
Check now
The Radio 3sixty immediately checks
whether there is a new firmware
version available.
NOTICE
Risk of damage!
– During an update, the
Radio 3sixty must not be
disconnected from the power
supply!
Software update via USB
Only for service: The Radio 3sixty is
switched to DFU mode here.
Setup wizard
You launch the setup wizard here
(see page 13).
Info
Displays the versions of the system
programmes and the ID of the
Radio 3sixty.
Backlight
Here, you set the brightness of the
display panel.
Standby – duration of illumination
in standby: Always "on" or switch off
after 10–180 seconds.