System Settings - Teufel Radio 3sixty Technical Description And User Manual

– After setting the alarm time, select
the bottom menu item "Save" to
activate it.
An active alarm clock is indicated with
a bell symbol " " on the display panel
(4) when the device is on.
The alarm time is also shown in
standby.
If the device is on, you can access
the "Alarm clock" menu directly by
pushing the button
In standby, switch the alarms on and
off one after another by pushing the
button (9).
– To keep sleeping, push the VOL
control (3) – the snooze time will
increase from 5 to 30 minutes each
time you push the control.
– To deactivate the alarm clock, push
the button (9) or the button

System settings

Network
In this menu, you can set the param-
eters for the WiFi connection.
Network wizard
The network wizard will show a list
of the available WiFi networks from
which you select your network. It
is part of the setup wizard and is
described on page page 13 from
step 6 on.
PBC Wlan setup
Connects the Radio 3sixty to the
network by pushing the WPS button
on the router.
(9).
(13).
View settings
Shows the parameters for the current
WiFi connection.
Wlan region
Here, you can set the region in which
you are operating the Radio 3sixty
so that the correct standards are
applied.
Manual settings
In this menu, you can manually enter
all required data for a WiFi connec-
tion.
NetRemote PIN setup
You can define the four-digit PIN here,
which is required to access the web
interface. Default setting: "1234".
Network profile
The Radio 3sixty will save the last four
WiFi connections in order to automat-
ically reconnect when changing the
location. In this menu, you can display
these WiFi connections and delete
them as desired.
Clear network settings
Here, you delete all saved WiFi
connection data.
Keep network connected
With this setting, you can set whether
the Radio 3sixty switches WiFi off
("NO") or leaves it switched on
("YES") in standby. Select "YES" to be
able to switch the device on via WiFi.
• Radio 3sixty 17