Configuration - Teufel Radio 3sixty Technical Description And User Manual

Configuration

The first time it is turned on or after
being reset to the factory default
settings, the Radio 3sixty requires
some network information. You enter
this information with the setup wizard
via the menu.
To select menu items and set
the parameters, turn the SELECT
control (7) and push the control to
confirm.
You can go back one individual step
with the BACK button (5).
(13)
1. Switch on the Radio 3sixty by
pushing the button
until "Setup wizard – Run now?"
appears on the display panel.
2. Select "YES" with the SELECT
control (7) and push the control.
3. Set the display format for the time:
12 hours (with AM/PM) or 24
hours.
(4)
(7)
(5)
(13) and wait
4. Select how the time should be set:
• via DAB radio;
• via FM radio (RDS):
• via the network – enter the time
zone and summer/winter time
here in the next step:
• manually ("No update") – enter
the date and time here.
5. With the setting "Keep network
connected", you determine
whether the Radio 3sixty switches
WiFi off ("NO") or leaves it on
("YES") in standby so that it can be
switched on via the network.
6. Select the region for your WiFi now
so that the correct standards are
applied.
7. The Radio 3sixty will now look for
available WiFi networks and display
them as a list after a short time.
• [WPS] – displays networks with
WiFi protected setup. It is very
easy to establish a connection
with them with the push of a
button or by entering the PIN.
• [New search] – starts a new
search.
• [Manual config.] – with this
menu item, you can enter all
data yourself – only intended for
special applications.
• Radio 3sixty 13