Table of Contents
Advertisement
EZ TOWER PARTS & REQUIRED TOOLS
EZ Tower Parts:
Description
21 ft (6.4 m) Guy Wire Set (wire guy wire attachment plate)
30 ft (9.1 m) Guy Wire Set (wire guy wire attachment plate)
M10 x 65 mm Bolt
M10 Locknut
1- 7/8 in x 72 in (4.76 cm x 1.8 m) Tower Tubes
1- 7/8 in x 48 in (4.76 cm x 1.2 m) Tower Tubes
1- 7/8 in x 42 in (4.76 cm x 1.0 m) Tower Tubes
IMPORTANT: If any parts are missing from the list
shown above, call Primus Wind Power.
8 EZ Tower
Owner's Manual, Rev A
TM
EZ Tower Required Tools:
Quantity
Description
1
100 ft (30.5 m) Measuring Tape
1
5/16 in (.8 cm) Wrench, Socket or Nut Driver (preferred)
1
9/16 in (1.4 cm) Wrench or Socket
1
1
Mallet
8
Pliers
16
Carpenters Level
4
Safety Glasses
4
Protective Gloves
1
4
IMPORTANT: Before you begin installation of your EZ
Tower be sure to have all parts and required tools.
1
1
Quantity
1
1 or 2
2
1
1
1
1
1 pair/person
1 pair/person
Advertisement
Table of Contents
