Sending Data; Docomo Connection Manager - Sharp Docomo SH-05D Operation Manual

Sending data

Example: Phonebook
1
In stand-by, p
2
Point the cursor to the
z/[Send
data]/
[iC transmission]
3
Select the sending method
;
[Send]
;
[Send all]/enter the terminal security
code/enter the authentication
password
4
[Yes]
5
Place the b mark on that of the
other party's FOMA terminal
Receiving data
1
In stand-by, place the b mark on
that of the other party's FOMA
terminal
2
[Yes]
Connecting to PC
By connecting the FOMA terminal and your
PC, exchange WMA files and images in the
microSD Card. In addition, connect to the
name/
Internet and perform data communication.
FOMA USB Cable with Charge Function 02
(sold separately) or FOMA USB Cable (sold
separately) is required.
For a data communication, installation of the
"FOMA communication configuration file"
(Driver) is required.
Refer to "Manual for PC Connection" for details.
You can download "FOMA communication
configuration file" and "Manual for PC
Connection" from the DOCOMO website.
http://www.nttdocomo.co.jp/support/ (in
Japanese only)

DOCOMO Connection Manager

"DOCOMO Connection Manager" is a software
which is convenient for using data communication
of DOCOMO. Easily set the PC depending on the
subscription. In addition, use the charge counter
function to check the approximate amounts of data
communication or usage fee.
Refer to the DOCOMO website for details.
http://www.nttdocomo.co.jp/support/utilization/
application/service/connection_manager/ (in
Japanese only)
14