Using Access Point Mode - Sharp Docomo SH-05D Operation Manual

Registering Bluetooth devices on
FOMA terminal
To register a Bluetooth device, the Bluetooth
passkey must be entered. Before starting the
registration, enter the same user-specified 4- to
16-digit number on the FOMA terminal and the
other party's Bluetooth device.
Switch the other party's Bluetooth device to the
registration stand-by status in advance.
1
In the Normal menu,
[Bluetooth]/[List/cnnct/discnct]
The device list screen appears when
registered device exists. Press C and
proceed to step 3.
2
[Yes]
3
Point the cursor to the Bluetooth
device to register/z/[Register
Devices]
4
Enter the Bluetooth passkey
Entering the Bluetooth passkey may not be
required depending on the other party's
Bluetooth device.
Connecting with Bluetooth devices
1
In the Normal menu,
[Bluetooth]/[List/cnnct/discnct]
2
Select a Bluetooth device to
The FOMA terminal supports Wi-Fi and
allows you to connect to the Internet using
Full Browser via the access point at home or
public wireless LAN service.
[Tool]/
Set the FOMA terminal to the access point (base
unit) and connect the Wi-Fi compatible device (sub
unit) to use services such as playing games.
Also, use the FOMA terminal as an access point to
connect Wi-Fi compatible devices within local area
network.
[Tool]/
12
Using Wi-Fi
IEEE 802.11n
5.2GHz/5.3GHz/5.6GHz (W52/W53/W56) is
not supported.
MIMO (Multiple Input Multiple Output) is not
supported.
40MHz radio-frequency bandwidth system
(HT40) is not supported.

Using access point mode

An access point mode is not available overseas.
The Internet service provider, compatible with
Wi-Fi connection such as mopera U, is used for
an access point mode.
Packet communication charges when using an
access point mode are same as when
connecting a PC or PDA, etc. Note that making
a communication with large-volume data will
lead to higher communication charges.