Sharp Docomo SH-05D Operation Manual page 13

C Setting use of access point mode
1
In the Normal menu,
[Wi-Fi]/[AP mode (base unit)]
The access point mode screen appears.
2
Select an item
;
[Start AP mode]/[Start AP mode (local)]
;
[Cnncted dev(sub) list]/select the Wi-Fi
compatible device/set each item/C
;
[Stop AP mode]/[Yes]
C Setting access point mode
1
In the access point mode screen,
i
2
Select an item
;
[Wireless setting]/enter the terminal
security code/set each item/C
;
[Host (APN) list]
;
[External device list]/select a Wi-Fi
compatible device/set each item/C
;
[Set local transmission]/select the
setting
;
[Reset settings]/enter the terminal
security code/[Yes]
[Tool]/
You can connect to the access point at home or
public wireless LAN service via Wi-Fi and use the
Internet.
C Setting use of client mode
1
2
Display an electronic compass to check the
direction that the FOMA terminal is headed to.
1
13
Using client mode
In the Normal menu,
[Wi-Fi]/[Client mode (sub)]
Select an item
;
[Connection(automatic)]
;
[Register new host]/select the
registration method
;
[Host list]/point the cursor to the
access point/C/set each item/C
;
[Disconnect/Stop]
Checking azimuth
In the Normal menu,
[Compass]
[Tool]/
[Tool]/