Features Explained; Inactivity Monitoring; Intruder (Arm/Disarm/Zoning) - Tunstall Caresse Installation And User Manual

Personal emergency response unit
Table of Contents

Advertisement

american caresse user guide doc :Layout 1

features explained

IMPORTANT - Inactivity monitoring and intruder monitoring requires additional telecare
sensors and may not be enabled on your Caresse, please contact your supplier for more
details on these functions. Please also contact your supplier for more details if you are
unsure how your blue function button has been programmed.

Inactivity monitoring

The Caresse can monitor movement around the home and send an alarm call
to the monitoring centre if no movement is detected within a specific time
period. To avoid false calls to the monitoring center, inactivity monitoring
should be de-activated when you leave your home.
• Activate (home mode) - press the blue away button
(the yellow LED will turn off and the unit will announce 'Home')
• De-activate (away mode) - press the blue away button
(the yellow LED will turn on and the unit will announce 'Away')
Intruder monitoring (Caresse+ model only)
The Caresse has the ability to provide a very effective, simple to use intruder
alarm facility, which will alert the monitoring center or personal recipient on
detection of an intruder.
• Arming (away mode) – when leaving your home, you should turn on
intruder monitoring by pressing the blue away button once. The unit will
sounds its exit tones and the yellow LED will turn on. You should leave your
home and lock your door before the exit tones end (approximately
30 seconds).
• Disarming (home mode) – when entering your home, the Caresse will
sound its entry tones, you can easily switch off intruder monitoring during
these entry tones by:
• Pressing the blue away button once and then pressing your pendant
straight away
When the intruder function has been disarmed, the entry tones will stop and
the yellow LED will turn off.
• Zoning - If you live in a house with your bedroom upstairs, it is possible to
protect the downstairs area at night while still being able to move around
upstairs without raising an alarm. This can be set in the following way:-
12
5/11/07
14:55
Page 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents