Pioneer CS-A50 User Manual page 16

Last number redial
Press button, then p ress button to redial the lastdialled number.
CH CODE button
During the conversation, the phone will scan the clear channel
automatically. If you s till hear noise or static, press the
to findaclearer channel.
NOTE:
It takes about 2 seconds f or the unit to scan a channel.
Pause function
This function allows you to insert a temporary pause during dialling
sequence. For example, dialling an international number (e.g. 011-886-
22-795-1234), some telephone company systems will not register the
entire number entry w ithout a pause between the prefix numbers. You
may have to dial 011- , dial 886 -
the phone number to register with the telephone company's system
andcomplete the call.
Keys confirmation tone
When the user presses keys on the handset, a key confirmation tone
will begenerated.
Battery low warning and shutdown protection
Once the battery voltage is low, the low battery icon will turn on.
The low battery warning tone will also be generated if the handset is i n
talk mode. You just press button to return to standby mode, then put
it o n the base or charger torecharge.
15
CH CODE button
. This allows adequate timing for
Out of range warning
In talk mode, if the handset is too far away from base unit, an out of
range warning tone will be heard. The user should move closer to the
base unit. If not, the handset will automatically return to standby mode
after about 20 seconds. When the handset makes a noise, press
ton to return to standby mode.
Line transfer
If extrahandsets are set to the base unit
1. During a phone conversation, press
number. The line will be hold andmakemusic sounds to the other end,
the two handsets will make transfer ring.
2. The other handset can press any key to answer the call automatically
after receiving the transferring.
3. Press button to return the connection to the call if the other
handset user does not want to take the call during the transfer ring.
4. If the two handsets do not respond within 30 seconds, the line will
disconnect automatically.
Paging
1. Press the button topagethehandset.
2. Press button oncemoretocancelthepagingoperation.
3. If you do not press button again, the handset will ring for about
25 seconds thenendthepagingautomatically.
16
but-
EDIT TRANS
button and handset